12-inch Oval Back Speaker Cabinet, Walnut Finish, Handmade

This is a clearance price.

I build amplifier cabinets and speaker cabinets in my spare time from my main work of furniture making.
I selected SPF lumber with few knots and used high-quality linden plywood for the back panel.

Speaker: 12-inch specification
Body: SPF lumber (18mm thick)
Back panel: Linden plywood (15mm thick)
Grille cloth: Guitar Amp
Baffle board: MDF (12mm thick)
Speaker mounting screws: (4-point mounting, 5x20 truss head small screws included)
Speaker mounting hole pitch: (296mm)
Wiring: Switchcraft #11 mono phone jack, insulated washer with shoulder, plastic insulated washer, jack plate (may have scuffs even when new), BELDEN 9497, Faston terminals (Audio Technica TL205M, 5.2mm male side), Kester44 solder used
Rubber feet: Commercially available
Finish: Oil stain (walnut color), urethane sanding sealer base coat, urethane semi-flat finish coat
Dimensions: W500 x D260 x H410 (including 10mm rubber feet)
Weight: 5.4kg

I put a lot of effort into making this cabinet carefully, which results in a solid construction that also affects its sound.
I hope you will enjoy this cabinet as a base, experimenting with adding sound-absorbing material, or changing the speaker and wiring to find your preferred tone.
The wood grain is continuous as the panels are assembled sequentially.
The older rings (which were on the outside of the wood when it was growing) are on the outside of the cabinet, just as they were when the tree was alive.
The main body is joined using half-blind dovetail joints.
I strive to build as carefully as possible, but there may be scratches, dents, warping, chips, cracks, uneven coloring, uneven finish, or speaker mounting marks from the manufacturing process. Please judge from the photos.
Please note that this listing is for the cabinet only; the speaker is not included.

Shipping will be via Yamato Transport (cash on delivery, drop-off discount applied).